If the seals on double glazing windows are broken, they can cause damp and mould. This could cause damage to the frame and walls surrounding it, and also affecting your health.
It is a cost-effective method to fix most uPVC window frames than to replace them. A glazier can clean the frame and the glass of the window, apply a new bead and smooth it.
Water Leaks
Window seals are designed to keep moisture out of your home. But, when they begin to break down, it could result in water leaks around your windows. A leaking window is not only annoying but it can cause serious damage to the surrounding structure of your home. It is essential to recognize the issue early and get it repaired by an expert before it gets any worse.
The most common cause of your leaking windows is not the glass itself, but on the frame and sill. A leak in this region is the most typical sign of a failed window seal. It could be due to damage to the window seal as a result of weather or aging, worn out caulking or even an obstruction in the drainage area resulting in the accumulation of ice or water.
The appearance of water between double-glazed panes is a common sign that your window seal has failed. However, this isn't as hazardous as a leak because the water doesn't travel long enough to enter your home. However, it does indicate that the inert gas sandwiched between the panes of glass has lost its lubrication, which will lower the insulation value of your windows.
Condensation between the panes of glass is another typical indication of a damaged seal. This may be caused by the window seal failing, or it could be due to an unforgiving climate in your home or an issue with the glass. The condensation can not only be unpleasant, but it could cause the development of mildew and mould within your home, which can be very difficult and expensive to eliminate.
If you're noticing these indicators, it's the time to have an examination of your double-glazed windows. Repairing or replacing your windows will protect your home against water leaks, reduce costs for energy, and also eliminate draughts. It's a small cost to provide your family with safety and comfort. Contact Thompson Creek Window today to discuss your options regarding a window seal repair or replacement. Our knowledgeable professionals are ready to assist! We provide assistance to homeowners throughout the Mid-Atlantic region.
Condensation
A broken double-glazing seal may let water in the space that is insulating. This can lead to fogging or misting within the window panes.
If you see condensation forming within your home, it's the perfect time to contact an experienced double glazing repair service. Condensation is a sign that the vacuum seal fabricated by the factory has been damaged and moisture is getting into the insulated gap.
Condensation can be caused by a variety of causes, but it's typically the result of gaskets that are not properly fitted or sealants, or insulation in the uPVC frame of the windows. There are a variety of options for double glazing seal repair however it is essential that the new seals are properly size to ensure an ideal seal and a snug fit.
Gaskets are usually made from polyurethane. It is a material that could be used to fill in gaps between double-glazed units. These are designed to be long-lasting but they are susceptible to deterioration in time due to wear and tear and exposure to various temperatures and weather conditions throughout the year.
As time passes the foam can shrink or crack. This can cause cracks in the seal, allowing moisture to seep into the double-glazed window. This can result in condensation and a loss in energy efficiency.
One option to fix this problem is to have the windows sealed. However, this is not certain to solve the issue as it may only get rid of the condensation that has formed. It won't address the underlying issues that are causing the double-glazed windows to leak or develop condensation.
Another solution is to replace your windows completely. This should be done by a professional who offers an insurance-backed guarantee. This means that if the company fails or goes bust you'll remain covered by the insurance. It's important to note that the warranty for your replacement windows should be a minimum of 10 years.
Misting
As the fall months get closer, it's a good idea to make sure that your double glazing seals are in good condition. Seals that have worn out can affect the insulation properties of your windows, but also cause condensation, dampness and mold. It is crucial to fix any problems with your double glazed windows as soon as possible to avoid further damage and save on energy costs.
A typical double-glazed window is made up of two glass panes joined by an internal space that's filled with gas. The sealant layer on the outside fills the gap between uPVC frames and the glass. This is crucial to maintaining the airtight seal that keeps cold and warm air separated in your home, saving you money on your heating bills. Unfortunately, over time, these seals may break down due to ageing or weather conditions, or even inadequate installation. After this, the magic insulation formula that makes double glazed windows so effective could begin to lose its effectiveness.
If left unchecked, damaged or faulty seals can lead to condensation and damp that will not only ruin the appearance of your windows but can also impact your health. Damp and mould can cause damage to your floors, walls and ceilings, but also create allergens and irritants within your home, which can be harmful to your health and your family's health.
One of the most frequent issues that can occur with your double glazing is that it can leak in between the panes. This happens when moisture gets into that insulated section of your window and is very difficult to fix without professional help for repair of the seal on your double glazing.
There are DIY methods of tackling this issue, but we'd recommend against this because it's not only dangerous but also very hazardous and damage your windows. These methods involve drilling holes into your glazed units and using chemicals to remove the fog and condensation. This could cause a number of problems, such as exposing your windows and units to water damage.
Professional glaziers have the skills, tools and experience to properly seal your uPVC frames and give you long-lasting results. They can also provide tips on how to keep your uPVC window in good condition to avoid any future issues.
Draughts
A draft coming from your window is an indication that the sealant has broken down and needs to be replaced or repaired. This will stop cold air from getting into your home. It will also improve the efficiency of your energy, reduce heating bills, and increase the comfort.
It is important to remember that a few draughts aren't caused by window seals but rather the gap between the bricks' frames. In some instances, it might be possible to correct this by simply caulking the gap. If this is not working, it must be resealed professionally.
If the sealant around windows with double glazing begins to degrade it allows water infiltration and can lead to dampness or even mold in some instances. This could have a negative effect on health and cause damage to the property. It is essential to address any water ingress problems immediately you spot them. If your windows are still in warranty, it is worth contacting the company you purchased them from, since they could cover the cost of the repairs.
It is a good idea to check whether the windows are covered under warranties. Certain companies offer lifetime guarantees and others offer 10 years. If your double glazing is covered by a warranty, you should consider calling the company you bought them from as soon as you can and providing them with the details of any issues you are experiencing. The ideal approach is to make this contact in person or via mail or email, to ensure that all information is documented and clear.
It is also worth noting that draughts are often caused by faulty hinges rather than a lack of effective seals. The hinges are responsible for closing the window sash (the section that you open) but they can also become stiff in time if not regularly oiled. This can create a gap between the frame and the sash and let cold air in. Replacing these hinges will solve this issue without affecting window seals.